Posted by Dan Cherry on April 22, 2000 at 15:15:15:
In Reply to: Re: GMM Boat Davit Set.... posted by Dan Cherry on April 22, 2000 at 15:12:43:
My first answer should have read:
: You can; however, the track the chocks are molded to needs to removed from under each chock. To make the model more accurate, the existing track indentation on the boat deck needs to be filled in, *as the indentation is too far inboard. The edge of the davit mechanism was even with the outboard edge of the deck, not 1 to 2 mm inboard as the model comes.* You might be better off if you scratchbuild new chocks rather than sand the track off the bottom of each. owever, that's just the way I did it.
Dan